■2 mono input channels and 2 stereo input channels.

■Ultra low-noise, discrete MIC preamplifiers on all microphone input channels.

■Optional low cut filter and peak indicator on mono channels.

■Built-in +48V phantom power for condenser mics.

■2 stereo inputs with 10dB input sensitivity selector.

■Stereo play in and stereo record out.

■1 AUX in and 1 AUX out.

■Max output level: +20dB

■Equivalent input noise of MIC input channel: -124dB

■Total harmonic distortion: <0.1%

■Frequency response: 20~20KHz +1/-2dB

■Dimension: 176X212X38 mm.

■2 mono input channels and 4 stereo input channels (three of them also can be used as MIC input channels).

■Have microphone input and line input for each stereo channel, separate gain control for MIC and line inputs on all stereo channels.

■Ultra low-noise, discrete MIC preamplifiers on all microphone inputs.

■Dedicated inserts on all mono channels.

■2 players can be linked to independent stereo play in channel.

■Mon send and FX send controls and peak indicator on all input channels.

■Built-in phantom power for condenser mics: +18V(battery)/+24V(AC).

■A switch for saving batteries on all input channels, to extend the battery's life put off this switch when the corresponding channel is not in use.

■Max output level: +20dB/+26dB(balanced)

■Equivalent input noise of MIC input channel: -124dB

■Total harmonic distortion: <0.1%

■Frequency response: 20~20KHz +1/-2dB

■Dimension: 302X225X43 mm.

■4 mono input channels, 2 stereo line input channels. Mono input channel has 3-band EQ, input fader control, effect control, AUX control, balanced control and peak indicator.

■Ultra low noise discrete preamplifier on each input channel.

■Effect send, headphone monitor.

■48V phantom power.

■ 8 standard input

■ 4 balanced MIC/LINE input channels with 3 band EQ. Able to accept a wide range of microphone and line level from XLR or 1/4 TRS connector.

■ Output of Record, headphone, stereo balance main.

■ with Power adapter outside

■ Dimension: 314x246x44 mm.

■ The MONO input channel has a MIC input socket, a LINE input socket and a input level att switch.

■ Each channel has Hi, Md, Low equalization circuit, monitor effect output and +48V phanton power.

■There are 7 band graphic equalizer for the Left and Right output to embellish the timbre.

■ Maxing output, monitor ourput effect send and record outputs. Furthermore, you can use headphone to monitor,headphone volume can be adjusted separately.

■Dimension:

■MM2402 can work on Stereo/MONO module, controlled by module switch, 2X4 unbalanced input channels and two balanced output channel. Separate volume control, built-in battery and external power supply. Total gain is 24dB, frequency responsibility is 10Hz~100KHz, total harmonic distortion is less than 0.05%, the max output level is +16dB (balanced output). Continuous working for more than 12 hours. Power supply: DC 9V battery